The linear module slide is a kind of fully automatic device. In the whole process of use, special attention should be paid to the safety problems to avoid the loss caused by these hidden dangers and increase the cost. Here are three safety precautions for users in the use environment of linear module slide, disassembly of motor and terminal use. There are five specific points as follows:

1. When eating in places with electromagnetic, electrostatic discharge and wireless magnetic wave interference, it must be operated correctly. Unreasonable operation will cause internal damage to the device.

2. If it is necessary to take out the motor in the sliding table of the linear module, pay attention to the upper and lower shafts of the motor during the disassembly process to avoid the risk of the upper and lower shafts slipping; When taking out, please block the upper and lower shafts with sliding table, and try not to clamp your body between the upper and lower shafts and the driving parts, and between the upper and lower shafts and the stand; At the same time, the power supply of the controller must be cut off before disassembly.

3. The terminal is designed to prevent the power (power, air, pressure, etc.) of the linear module slide from disappearing or causing danger. The terminal effect will cause danger when the clamping object falls. The danger of the servo electric cylinder is related to the shape, weight, temperature and chemical properties of the object. These factors should be measured before use and appropriate protective measures should be taken.

4. It is forbidden to use the linear module sliding table with quality certification in any flammable gas environment. During the operation of the device, the heat generated may ignite combustible gas, powder, igniting liquid, etc., which may cause explosion or fire.

5. When the brake of linear module sliding table is released, the upper and lower shafts will also slide down. Therefore, when pressing the emergency stop button and releasing the brake, please use the sliding table to block the upper and lower shafts. Sliding table is a kind of mechanical structure which can provide linear motion. It can be used horizontally or vertically, or combined into a specific motion mechanism.

There are two types of sliding table: ball screw sliding table and synchronous toothed belt sliding table. However, the combination of different mechanisms has different names in different industries. Linear motors are more common, such as linear sliding table, electric sliding table, electric cylinder and manipulator. With so many sliding tables, which company's sliding table is better, and what matters need attention when selecting sliding table?

1. The accuracy of the slide directly affects the quality of the product. In order to better grasp the quality of the product, it is necessary to improve the accuracy of all aspects in practical application. Therefore, the accuracy of the slide should be tested when selecting the slide. To improve the accuracy of sliding table, the combination of each unit can realize the linear and curvilinear movement of load, making the automation of light load more flexible and positioning more accurate.

2. There are many types and models of slide platform. The micro electric steel can not be selected blindly, otherwise it will not be used or the service life of slide platform is very short. Therefore, the corresponding slide platform type should be selected according to the actual use environment, and the sealed slide platform or general environment slide platform should be selected as appropriate.

3. As the main part of the machine tool, the load of the sliding table is very heavy. Therefore, when selecting the sliding table, we should pay attention to the load of the sliding table, including the load of horizontal use and vertical use.

4. Installation method of slide the installation of slide is simple and troublesome. It is very easy to install the slide, but the installation of slide module needs special attention. After all, the sliding platform module is a precision transmission part, so it should be handled with care during the installation process. If the single axis arm is not used, the accuracy may not be accurate. At the same time, we should pay attention to the installation mode of the slide is parallel installation or vertical installation.

5. The final speed of the slide, the speed of the slide directly affects the production efficiency of products, and in the competitive modern society, efficiency is money, is life, how to produce more quality and quantity of products in a limited time, is one of the key factors for enterprises to consider, the higher the speed of the slide, the more popular it will be. It is suggested that you choose the right type according to the final speed of the slide.

6. Generally speaking, the sliding table suitable for multiple motors will be more popular with customers. No matter whether the sliding table can use multiple motors or not, when selecting the sliding table, the D-A manipulator needs to find out which motor is suitable for the sliding table at the beginning, and then select the sliding table suitable for multiple motors as appropriate. The above is the selection of slides have to know the six major points for attention, I hope to have a reference for you, after understanding, can easily and accurately buy to their own satisfaction of the slide, in addition, we should not blindly run to the popular slide, rational thinking, choose what you need, high quality slide.